Chemické vlastnosti
| Materiál | Teplotně odolné do | Specifický eletrický odpor | Dielektrická konstanta | Elektrická pevnost | Hořlavost | Koeficient tření |
| Materiál- Popis | max st. C | Ohm | 103 Hz | MV/m | UL94 1.6mm | |
| Polyamid-6 PA | 120 | 10^15 | 0,02 | 35 | V2 | 0,03 |
| Polyamid-66 PA | 120 | 10^15 | 0,15 | 30 | V2 | 0,03 |
| ld-Polyetylen LD-PE | 70 | 10^17 | 0,0003 | 60 | | 0,17-1,05 |
| hd-Polyetylen HD-PE | 80 | 10^15 | 0,001 | 53 | | 0,25-0,03 |
| Thermoplast. guma (TPG) | 135 | | | | | |
| Silikon | 200 | | | | | |
| Pružné PVC | 66 | | | | | |
| Teplotně odolné. pružné PVC | 200 | | | | | |
| Polyoxymetylen POM | 100 | 10^15 | 0,025 | 70 | HB | 0,25 |
| Polyvinylchlorid PVC | 80 | 10^10 | 0,01 | 30 | HB | |
| Cellidor-B | 90 | 10^15 | 0,01 | | | |
| Thermopl. Polyester 20% GF | 170 | 10^15 | 0,003 | 50 | HB | 0,02 |
| Polypropylen PP | 110 | 10^16 | 0,0005 | 80 | HB | 0,05 |
| Polystyrol PS | 81 | 10^16 | 0,0004 | >40 | HB | 0,05 |
| Bakelit | 120 | 10^10 | <0,03 | 75 | VO | 0,05 |
| Polyamid-6 + 30 % GF | 150 | 10^15 | 0,02 | 30 | HB | 0,35 |
| Polyuretan PU | 80 | | 0,01 | 20 | HB | 0,15-0,04 |
| Sealon | 85 | 10^15 | | | HB | |
| Polystyren, melt 21 | 81 | 10^16 | 0,0004 | >40 | HB | 0,05 |
| Polystyren, glashell | 88 | 10^16 | 0,0004 | >40 | HB | 0,05 |
| Polyphenylen sulfid | 200 | 10^15 | | 17 | V.0/5V | |
| Polyamid-6 + 25 % GF | 150 | 10^15 | 0,02 | 30 | HB | 0,35 |
| Mosaz (Cu Zn 40 Pb 3) | | 66x10^-7 | | | | |
| Alpaka (Cu Ni 25 Zn) | | 490x10^-7 | | | | |
| Automatová ocel (S300Pb) | | 720x10^-7 | | | | |
